Linux操作系统中运行ASP.NET 4
创始人
2024-07-19 19:30:35
0

《在openSUSE下ASP.NET 4开发环境配置》中已经配置好了 openSUSE 11.3 操作系统。

现在,我们进入“GNOME 终端”,使用 ifconfig 命令验证一下本虚拟的 IP 地址就是一开始我们在宽带路由器中为它分配的静态地址。

  1. ben@linux-nyhn:~> /sbin/ifconfig  
  2. eth0      Link encap:Ethernet  HWaddr 08:00:27:51:5B:0B    
  3.           inet addr:192.168.1.251  Bcast:192.168.1.255  Mask:255.255.255.0  
  4.           inet6 addr: fe80::a00:27ff:fe51:5b0b/64 Scope:Link  
  5.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1  
  6.           RX packets:853 errors:0 dropped:0 overruns:0 frame:0  
  7.           TX packets:807 errors:0 dropped:0 overruns:0 carrier:0  
  8.           collisions:0 txqueuelen:1000   
  9.           RX bytes:853227 (833.2 Kb)  TX bytes:90376 (88.2 Kb)  
  10.  
  11. lo        Link encap:Local Loopback    
  12.           inet addr:127.0.0.1  Mask:255.0.0.0  
  13.           inet6 addr: ::1/128 Scope:Host  
  14.           UP LOOPBACK RUNNING  MTU:16436  Metric:1  
  15.           RX packets:22 errors:0 dropped:0 overruns:0 frame:0  
  16.           TX packets:22 errors:0 dropped:0 overruns:0 carrier:0  
  17.           collisions:0 txqueuelen:0   
  18.           RX bytes:1300 (1.2 Kb)  TX bytes:1300 (1.2 Kb)  
  19.  
  20. ben@linux-nyhn:~> sudo vim /etc/hosts 

如上所示,再使用 vim 编辑器编辑 /etc/hosts 文件,增加一个域名 ben.skyiv.com,如下图所示:

注意上图中的 IP 地址必须是 127.0.0.1,而不能是 192.168.1.251。在宿主机的 Windows Vista 操作系统中以管理员身份进入命令提示符,使用记事本编辑 C:\Windows\System32\drivers\etc\hosts 文件,增加一个同样的域名 ben.skyiv.com,注意此时 IP 地址必须是 192.168.1.251,而不能是 127.0.0.1,如下图所示:

我们的 openSUSE 11.3 操作系统已经安装好了 apache 软件,但尚未启用,如下所示:

  1. ben@linux-nyhn:~> sudo /sbin/service apache2 status  
  2. Checking for httpd2:                                              unused 

那么,现在,让我们设置 apache 为开机随系统启动,并且现在就启动它吧:

  1. ben@linux-nyhn:~> sudo /sbin/chkconfig -add apache2  
  2. apache2                   0:off  1:off  2:off  3:on   4:off  5:on   6:off  
  3. ben@linux-nyhn:~> sudo /sbin/service apache2 start  
  4. Starting httpd2 (prefork)                                            done  
  5. ben@linux-nyhn:~> sudo /sbin/service apache2 status  
  6. Checking for httpd2:                                              running 

现在让我们在宿主机的 Windows Vista 操作系统的谷歌浏览器中打开 ben.skyiv.com 网站试试看吧:

如上图所示,我们的 Apache 2.2.15 已经正常工作在 Linux/SUSE 操作系统上了。只不过现在该网站还没有内容而已。

在 openSUSE 操作系统中,Apache 的默认文档是放在 /srv/www/htdocs 目录下的。

openSUSE 操作系统已经为每个用户建立了 public_html 目录,例如我的用户就是 /home/ben/public_html 目录,用以放置该用户的网站的内容。可以通过 ben.skyiv.com/~ben 访问,这里 ben 是我的用户名,如下图所示:

从上图中可以看出,这个目录是空的,需要用户自己放里放东东。那么,我们就编写如下一个 index.html 吧:

  1. ben@linux-nyhn:~> cd public_html  
  2. ben@linux-nyhn:~/public_html> vim index.html 

再次在 Windows Vista 操作系统中访问 ben.skyiv.com/~ben 网页:

现在让我们来看看 mono 的版本:

  1. ben@linux-nyhn:~> mono --version  
  2. Mono JIT compiler version 2.6.4 (tarball Mon Jul  5 13:53:45 UTC 2010)  
  3. Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com  
  4.     TLS:           __thread  
  5.     GC:            Included Boehm (with typed GC and Parallel Mark)  
  6.     SIGSEGV:       altstack  
  7.     Notifications: epoll  
  8.     Architecture:  amd64  
  9.     Disabled:      none  
  10. ben@linux-nyhn:~>   
  11. ben@linux-nyhn:~> gmcs --version  
  12. Mono C# compiler version 2.6.4.0 

这个 mono 2.6.4 的版本太低了。根据 mono 官方下载页面的指示,按如下步骤进行升级:

  1. ben@linux-nyhn:~> sudo zypper addrepo http://ftp.novell.com/pub/mono/download-stable/openSUSE_11.3 mono-stable  
  2. 正在添加安装源 'mono-stable' [done]  
  3. Repository 'mono-stable' successfully added  
  4. Enabled: Yes  
  5. Autorefresh: No  
  6. URI: http://ftp.novell.com/pub/mono/download-stable/openSUSE_11.3  
  7.  
  8. ben@linux-nyhn:~> sudo zypper refresh --repo mono-stable  
  9. Retrieving repository 'mono-stable' metadata [done]  
  10. 正在构建 'mono-stable' 安装源缓存 [done]  
  11. Specified repositories have been refreshed.  
  12. ben@linux-nyhn:~> zypper dist-upgrade --repo mono-stable 
  13. =================> 在这里进行漫长的升级 <=================  
  14. ben@linux-nyhn:~>  

升级完成,再次查看 mono 的版本:

  1. ben@linux-nyhn:~> mono --version  
  2. Mono JIT compiler version 2.8.1 (tarball Fri Nov 12 14:37:21 UTC 2010)  
  3. Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com  
  4.     TLS:           __thread  
  5.     SIGSEGV:       altstack  
  6.     Notifications: epoll  
  7.     Architecture:  amd64  
  8.     Disabled:      none  
  9.     Misc:          debugger softdebug   
  10.     LLVM:          yes(2.8svn-mono)  
  11.     GC:            Included Boehm (with typed GC and Parallel Mark)  
  12. ben@linux-nyhn:~> dmcs --version  
  13. Mono C# compiler version 2.8.1.0 

果然已经升级到最新的 mono 2.8.1 版本了。

Apache mod_mono configuration tool 网页可以生成运行 ASP.NET 所需要的 Apache 软件的配置文件,如下图所示:

生成的 ben.skyiv.com.conf 文件如下所示:

  1.  
  2.   ServerName ben.skyiv.com  
  3.   DocumentRoot /home/ben/www  
  4.   # MonoServerPath can be changed to specify which version of ASP.NET is hosted  
  5.   # mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0  
  6.   # For SUSE Linux Enterprise Mono Extension, uncomment the line below:  
  7.   # MonoServerPath ben.skyiv.com "/opt/novell/mono/bin/mod-mono-server2"  
  8.   # For Mono on openSUSE, uncomment the line below instead:  
  9.   MonoServerPath ben.skyiv.com "/usr/bin/mod-mono-server2"  
  10.  
  11.   # To obtain line numbers in stack traces you need to do two things:   
  12.   # 1) Enable Debug code generation in your page by using the Debug="true"   
  13.   #    page directive, or by setting  in the   
  14.   #    application's Web.config  
  15.   # 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging  
  16.   MonoDebug ben.skyiv.com true  
  17.     
  18.   # The MONO_IOMAP environment variable can be configured to provide platform abstraction  
  19.   # for file access in Linux.  Valid values for MONO_IOMAP are:  
  20.   #    case  
  21.   #    drive  
  22.   #    all  
  23.   # Uncomment the line below to alter file access behavior for the configured application  
  24.   MonoSetEnv ben.skyiv.com MONO_IOMAP=all 
  25.   #  
  26.   # Additional environtment variables can be set for this server instance using   
  27.   # the MonoSetEnv directive.  MonoSetEnv takes a string of 'name=value' pairs   
  28.   # separated by semicolons.  For instance, to enable platform abstraction *and*   
  29.   # use Mono's old regular expression interpreter (which is slower, but has a  
  30.   # shorter setup time), uncomment the line below instead:  
  31.   # MonoSetEnv ben.skyiv.com MONO_IOMAP=all;MONO_OLD_RX=1 
  32.  
  33.   MonoApplications ben.skyiv.com "/:/home/ben/www"  
  34.    
  35.     Allow from all  
  36.     Order allow,deny  
  37.     MonoSetServerAlias ben.skyiv.com  
  38.     SetHandler mono  
  39.     SetOutputFilter DEFLATE  
  40.     SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary  
  41.    
  42.    
  43.     AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript  
  44.    
  45.  

这个 ben.skyiv.com.conf 文件需要放在 /etc/apache2/conf.d 目录下:

  1. ben@ben:~> ll /etc/apache2/conf.d  
  2. 总计 8  
  3. -rw-r--r-- 1 ben  users 2037 01-04 01:21 ben.skyiv.com.conf  
  4. -rw-r--r-- 1 root root  1239 10-01 02:12 mod_mono.conf 

然后创建 /home/ben/www 目录,并重启 Apache 服务:

  1. ben@ben:~> mkdir www  
  2. ben@ben:~> sudo /etc/init.d/apache2 restart  
  3. Syntax OK  
  4. Shutting down httpd2 (waiting for all children to terminate)      done  
  5. Starting httpd2 (prefork)                                         done  
  6. ben@ben:~>  

现在让我们建立一个网站:

  1. ben@ben:~> cd www  
  2. ben@ben:~/www> vim index.html 

在 openSUSE 11.3 操作系统中访问 ben.skyiv.com 网站,如下图所示:

点击上图中的“服务器信息”,出现“The resource cannot be found”错误:

这是预料之中的,因为我们还没有编写 info.aspx 文件呢。从上图中可以看出,ASP.NET 是 2.0 版的。

现在,我们修改 /etc/apache2/conf.d/ben.skyiv.com.conf 文件,如下所示:

  1. ben@ben:~/www> sudo vim /etc/apache2/conf.d/ben.skyiv.com.conf 

如上图所示,将 mod-mono-server2 改为 mod-mono-server4 。然后重启 Apache 服务:

  1. ben@ben:~> sudo /etc/init.d/apache2 restart  
  2. Syntax OK  
  3. Shutting down httpd2 (waiting for all children to terminate)      done  
  4. Starting httpd2 (prefork)                                         done  
  5. ben@ben:~>  

然后重新访问 ben.skyiv.com/aspx/info.aspx 网页:

 

从上图中可以看出,已经运行在 ASP.NET 4 了。

 

现在,让我们来编写 info.aspx 程序吧:

  1. ben@linux-nyhn:~/www> mkdir aspx src bin  
  2. ben@linux-nyhn:~/www> vim aspx/info.aspx  
  3. ben@linux-nyhn:~/www> vim src/info.aspx.cs  
  4. ben@linux-nyhn:~/www> vim src/info.rsp 

网页文件 aspx/info.aspx 的内容如下所示:

  1.  <%@ Page Language="C#" inherits="Skyiv.Ben.Web.InfoPage" %> 
  2.    
  3.   
  4.   
  5.      
  6.   服务器信息 
  7.  
  8.  
  9.   
  10.   返回 
  11.   
  12.   
  13.   
  14.       
  15.     
  16.     
  17.   
  18.   

对应的 C# 源程序 src/info.aspx.cs 的内容如下所示:

  1. using System;  
  2. using System.Data;  
  3. using System.Web.UI;  
  4. using System.Web.UI.WebControls;  
  5.  
  6.  namespace Skyiv.Ben.Web  
  7.  {  
  8.   public class InfoPage : Page  
  9.  {  
  10.  protected GridView dgMain;  
  11.    public void Page_Load(object sender, EventArgs e)  
  12.    {  
  13.      if (IsPostBack) return;  
  14.       dgMain.DataSource = GetInfo();  
  15.       dgMain.DataBind();  
  16.      }  
  17.    DataTable GetInfo()  
  18.      {  
  19.       DataTable dt = new DataTable();  
  20.       dt.Columns.Add("项目", typeof(string));  
  21.        dt.Columns.Add("内容", typeof(string));  
  22.      AddRow(dt, "操作系统", Environment.OSVersion);  
  23.      AddRow(dt, "公共语言运行库", Environment.Version);  
  24.       return dt;  
  25.      }  
  26.     void AddRow(DataTable dt, string name, object value)  
  27.    {  
  28.      DataRow dr = dt.NewRow();  
  29.      dr[0] = name;  
  30.      dr[1] = value.ToString();  
  31.     dt.Rows.Add(dr);  
  32.     }  
  33.    }  
  34.   } 

编译响应文件 src/info.rsp 的内容如下所示:

  1. -out:../bin/info.dll  
  2. -t:library  
  3. -r:System.Data  
  4. -r:System.Web  
  5. info.aspx.cs 

然后就是使用以下命令进行编译了:

  1. ben@linux-nyhn:~/www> cd src  
  2. ben@linux-nyhn:~/www/src> dmcs @info.rsp 

编译完成,网站的运行效果如下图所示:

至此,我们成功地在 Linux 操作系统中运行 ASP.NET 4。

原文链接:http://www.cnblogs.com/skyivben/archive/2011/01/04/1925385.html

  1. 详解ASP.NET MVC 3 beta新特性
  2. ASP.NET MVC 3让依赖注入实现得更简单
  3. 详解ASP.NET MVC 3 beta新特性
  4. ASP.NET MVC 3新特性与NuPack功能详解
  5. .NET开发人员应该关注的七个开源项目

 

相关内容

热门资讯

如何允许远程连接到MySQL数... [[277004]]【51CTO.com快译】默认情况下,MySQL服务器仅侦听来自localhos...
如何利用交换机和端口设置来管理... 在网络管理中,总是有些人让管理员头疼。下面我们就将介绍一下一个网管员利用交换机以及端口设置等来进行D...
施耐德电气数据中心整体解决方案... 近日,全球能效管理专家施耐德电气正式启动大型体验活动“能效中国行——2012卡车巡展”,作为该活动的...
20个非常棒的扁平设计免费资源 Apple设备的平面图标PSD免费平板UI 平板UI套件24平图标Freen平板UI套件PSD径向平...
德国电信门户网站可实时显示全球... 德国电信周三推出一个门户网站,直观地实时提供其安装在全球各地的传感器网络检测到的网络攻击状况。该网站...
为啥国人偏爱 Mybatis,... 关于 SQL 和 ORM 的争论,永远都不会终止,我也一直在思考这个问题。昨天又跟群里的小伙伴进行...
《非诚勿扰》红人闫凤娇被曝厕所... 【51CTO.com 综合消息360安全专家提醒说,“闫凤娇”、“非诚勿扰”已经被黑客盯上成为了“木...
2012年第四季度互联网状况报... [[71653]]  北京时间4月25日消息,据国外媒体报道,全球知名的云平台公司Akamai Te...